CP5240
CP5240_001mCE010F
Level transmitter for sewage water
Application:
Measurement, monitoring, and control of liquid levels for sanitation, wastewater, and certain aggressive products. Chemical compatibility will require a detailed datasheet of the concerned liquid.
Principle:
The level measurement is performed by differential pressure measurement between the liquid surface and the position of the submerged transmitter. The pressure is converted into an electrical signal using piezoresistive technology and conditioned into a 4/20mA current loop.
Mechanical Specifications:
| Housing body: | Brass with PTFE (Teflon®) surface treatment |
| Protective head: | Antistatic PTFE (Teflon®) |
| Cable: | 2 conductors 0.22 mm² + capillary under shielding, food-grade PVC sheath Ø ext. 6 mm |
| Measuring cell: | Piezoresistive in 316L stainless steel |
| Diameter: | 30 mm |
| Height: | 160 mm (excluding cable) |
| Weight: | 370 g with 10 meters of cable as standard. Additional cable on request |
| Mounting: | Pendular, suspended by its cable, supplied with an attachment system (KITCAB) |
Electrical Specifications:
| Measurement signal: |
4/20mA current loop, 2 wires. 4mA for 0m and 20mA for full scale |
| Power supply: | Direct current, operating range from 6 to 38 volts at the transmitter terminals (take into account voltage drop and connected components). Refer to the specifications of the supplied protection module |
| Consumption: | The signal value in milliamps |
