CP5400
CP5400_006bar__
Pressure sensor with connector
Application:
Measurement, monitoring, and control of pressure or liquid level on hydraulic pipes (connectable model).
Principle:
The measurement is performed by differential sensing between atmospheric pressure and the fluid pressure inside the pipe. The pressure is converted into an electrical signal using piezoresistive technology and conditioned in a 4/20mA loop.
Mechanical characteristics:
| Housing body: | Stainless steel |
| Fitting: | 316L stainless steel, 3/8 inch BSPC (tapered gas), tightened with hex key 24 |
| Connection: | via screw terminal and DIN 43650 (A) cable gland |
| Measuring cell: | piezoresistive on insulator with flexible membrane |
| Diameter: | tube: 24 mm |
| Height: | 145 mm (overall) |
| Weight: | 235 g |
Electrical characteristics:
| Measurement signal: |
4/20mA current loop, 2-wire. 4mA for measurement = 0m and 20mA for full scale |
| Power supply: | DC voltage, from 6 to 30 volts at the transmitter terminals (consider voltage drop and connected elements) |
| Connection: | 1: + 2: - T: Ground |
| Consumption: | The value of the signal in milliamps |
