CP5250
CP5250_0006bar010P
Pressure sensor with cable
Application:
Measurement, monitoring, and control of pressure or liquid level in hydraulic pipelines (connectable model).
Principle:
The measurement is performed by differential sensing between atmospheric pressure and the fluid pressure in the pipeline. The pressure is converted into an electrical signal using piezoresistive technology and conditioned into a 4/20mA loop.
Mechanical Characteristics:
| Housing body: | Stainless steel |
| Fitting: | 316L stainless steel, 3/8 inch BSPC (conical gas), tightened with hex.24 wrench. |
| Cable: | 2 conductors 0.22mm² + capillary under shielding |
| Measuring cell: | Piezoresistive on insulator and flexible silicone membrane |
| Diameter: | Tube: 24 mm |
| Height: | 155 mm (overall) |
| Weight: | 260 g (without cable) |
Electrical Characteristics:
| Measurement signal: |
4/20mA current loop, 2 wires. 4mA corresponds to 0m measurement and 20mA to full scale |
| Power supply: | DC voltage, from 6 to 30 volts at the transmitter terminals (consider voltage drop and connected elements) |
| Consumption: | The signal value in milliamperes |
