CP5350
CP5350_0010bar002P
Pressure sensor with cable
With ACS certification
Application:
Measurement, monitoring, and control of pressure or liquid level in hydraulic pipelines (connectable model).
Principle:
The measurement is performed by differential pressure between atmospheric pressure and the fluid pressure in the pipe. The pressure is converted into an electrical signal using piezoresistive technology and conditioned in a 4/20mA loop.
Mechanical characteristics:
| Housing body: | Stainless steel |
| Fitting: | 316L stainless steel, 1/2 inch BSPC (conical gas), tightened with hex key 24 mm. |
| Cable: | 2 conductors 0.22mm² + capillary under shielding |
| Sensing element: | Piezoresistive on flush 316L stainless steel insulator |
| Diameter: | Tube: 24 mm |
| Height: | 155 mm (overall) |
| Weight: | 260 g (without cable) |
Electrical characteristics:
| Measurement signal: |
4/20mA current loop, 2-wire. 4mA for 0m measurement and 20mA for full scale |
| Power supply: | DC voltage from 6 to 30 volts at the transmitter terminals (consider voltage drop and connected components) |
| Consumption: | The signal value in milliamps |
