CP5500
CP5500_0010bar__
Pressure sensor with connector
With ACS certification
Application:
Measurement, monitoring, and control of pressure or liquid level in hydraulic pipes (connectable model).
Principle:
The measurement is performed by differential measurement between atmospheric pressure and the fluid pressure in the pipe. The pressure is converted into an electrical signal by piezoresistive technology and conditioned in a 4/20mA loop.
Mechanical characteristics:
| Housing body: | Stainless steel |
| Fitting: | Stainless steel 316L, 1/2 inch BSPC (tapered gas), tightened with a hex.24 wrench. |
| Connection: | by screw terminal block and DIN 43650 (A) cable gland |
| Measuring cell: | piezoresistive on flush stainless steel 316L membrane |
| Diameter: | tube: 24 mm |
| Height: | 155 mm (overall) |
| Weight: | 235 g |
Electrical characteristics:
| Measurement signal: |
4/20mA current loop, 2 wires. 4mA for measurement = 0m and 20mA for full scale |
| Power supply: | Direct voltage, from 6 to 30 volts at the transmitter terminals (consider voltage drop and connected components) |
| Connection: | 1: + 2: - T: Ground |
| Consumption: | Signal value in milliamps |
