Available
CP5210
CP5210_001mCE010K
Water Level transmitter
Application:
Measurement, monitoring and control of liquid levels (static or in motion), for narrow wells and boreholes.
Operating Principle:
Level measurement is performed by measuring the differential pressure between the liquid surface and the position of the submerged transmitter. The pressure is converted into an electrical signal using piezoresistive technology and conditioned via a 4–20 mA loop.
Mechanical Specifications:
| Housing body: | 316L stainless steel |
| Protective head / weight: | 316L stainless steel |
| Cable: | 2 conductors 0.22mm² + capillary tube under shielding, PVC or PUR sheath reinforced with Kevlar depending on the length. |
| Sensing element: | Piezoresistive on insulating base with flexible membrane. |
| Diameter: | 18 mm |
| Height: | 180 mm (excluding cable) |
| Weight: | 210 g (without cable) |
| Mounting: | Suspended installation; transmitter hangs by its cable, supplied with a suspension system. |
Electrical Specifications:
| Measurement signal: | 4–20 mA current loop, 2 wires. |
| Power supply: | DC supply, operating range from 6 to 38 volts at transmitter terminals (consider voltage drop and connected devices). Refer to the characteristics of the supplied protection module. |
| Power consumption: | Equal to the signal value in milliamperes |
Accessories
